Basic House Wiring Suggestions for Beginners: Safety Tips

Basic House Wiring Suggestions for Beginners: Safety Tips
Household wiring is a challenging task to master, and it can be dangerous if you do it improperly. To help you avoid an electrical fire or injury, CableWholesale has compiled basic house wiring suggestions for beginners and safety tips. With these, homeowners with a lack of experience in cabling can save themselves from installation fees. With enough time, patience, and the right wiring accessories, you’ll give your home a flawless wired setup.

Types of Wires You’ll Need

People most commonly use nonmetallic, or NM, wires for household wiring. NM wires consist of two or more individual wires. Manufacturers wrap these wires in protective plastic sheathings for safety and performance purposes.

There is a wide variety of NM wires on the market, so it’s crucial to determine which one your home needs. For example, larger circuit wires are incredibly hazardous, as they carry circuit voltage. You should only incorporate them into your wiring setup when necessary.

Other Wires You Might Have at Home

When it comes to wired network setups, most homeowners will use Cat5e or Cat6 Ethernet cables. For home entertainment systems, it’s common for HDMI cables to come into play.

How To Connect Electrical Wires

To begin connecting electrical wires, you’ll need to assess the wiring cable’s features. Identify the outer sheathing, otherwise known as the cable’s jacket, and the inner wires. Markings on the jacket will inform you of the cable number and the gauge of wires inside. Different jacket colors indicate different household purposes. One of the essential basic house wiring suggestions for beginners is to familiarize yourself with this color code.

  • Black wires: They carry electrical currents from the service panel to an outlet or device.
  • Red wires: Also called “hot wires,” red wires help with smoke detectors’ communication. If one goes off, the wired connection ensures the rest do, too.
  • White and gray wires: These wires often carry currents throughout the house. Though dubbed “neutral,” they can still cause a shock, so be careful.
  • Green wires: These wires bridge the gap between an outlet box and an electrical panel. Green wires can only connect with other green wires.

How To Avoid Common Wiring Mistakes

Electrical wiring mistakes could cause a serious accident. Avoid common wiring mistakes that promote your household’s safety by adopting the following tips.

  • Don’t connect cables outside of electrical junction boxes.
  • Avoid cutting your wires shorter than three inches. This will make handling them safer and easier.
  • Veer away from using unstable outlets and switches.
  • Utilize a cable clamp to reduce the chances of damaging wire insulation.

For All Your Wiring Needs

CableWholesale specializes in all things cabling. We have various high-speed HDMI cables with Ethernet for creating the ultimate home entertainment experience, as well as wiring accessories to help you keep a tidy setup. With wholesale power supplies, such as power cords and surge protectors, you can safely monitor your electrical usage.

How To Avoid Overheating Your Cabling System

How To Avoid Overheating Your Cabling System
When processing large volumes of data transmissions and requests, cables tend to heat up. Overheating continues to pose an issue for high-demand cabling systems and can result in costly data loss, cable damage, and network repairs. CableWholesale explores how to avoid overheating your cabling system to promote better network safety and performance.

Higher Category Cables

Cable manufacturers have vastly improved their products’ abilities to withstand heat. Since overheating is often associated with cable construction, opting for a higher category cable can often reduce this issue.

Cat5e, Cat6, and Cat6a Ethernet cables all fare especially well with high demands. The more requests your network makes daily, the higher your category cable selection should be to prevent cases of overheating.

Utilize Shielded Cabling

Cables that use foil shields are best at dissipating heat. So, if you’re trying to nix the overheating problem, be sure that your cabling system is using shielded twisted pair cables in the first place.

Go for Smaller Bundle Sizes

Cables within a large bundle often experience higher temperatures than those in smaller bundles. If you can’t forego bundling your cables, smaller bundles allow for heat to escape more ideally than large heaps of cords.

Have Quality Cable Management and Maintenance

To avoid overheating your cabling system, you must have it organized properly. Using cable management tools and accessories, optimize your cabling system’s airflow. Airflow is imperative to network safety and performance.

One tip for best cable management is to disperse your cables when possible. You should also clean any accumulation of dust off your cables regularly. Both steps will counteract high cable density, which increases cable heat.

For over 16 years, CableWholesale has committed to providing high-quality cables and network accessories. Should you be looking to upgrade your network system, be sure to check out our wide assortment of cat5e Ethernet cable bundles. Their shielded structure doesn’t just improve their resistance to heat damage, but it also reduces crosstalk to provide clear and quick connection. Check out our website today for all things cabling infrastructure at an affordable price.

The Top Ethernet Cables for Gaming: Buyer’s Guide

The Top Ethernet Cables for Gaming: Buyer’s Guide
Every dedicated gamer knows how influential a quality setup is to the gaming experience. Among any well-rounded setup should be a reliable set of Ethernet cables. Equipping your gaming station with the right Ethernet cables reduces lagging and buffering—two connectivity issues prone to irk even the recreational gamers. To help you create your own premier gaming system with seamless streaming, CableWholesale investigates the top Ethernet cables for gaming.

Top Ethernet Options

The most popular Ethernet cable options for wired networks can be reduced to three cable categories. The three categories are Cat5e, Cat6, Cat6a. They each have their own benefits within a network setup, all capable of providing reliable connection over a wireless system.

Though Cat5e, Cat6, and Cat6a cables are all known to establish speedy and secure internet without pause, only Cat5e and Cat6 are popular amongst gamers.

Narrowing It Down: Cat5e vs. Cat6

Most gamers will find satisfactory connection with either Cat5e cables or Cat6 cables—so how do you decide between the two?

Due to Cat6’s more meticulous manufacturing standards, this type of cable is typically more resistant to interference than Cat5e. Let’s explore how the improved standards and structure make Cat6 cords the top Ethernet cables for gaming in this buyer’s guide.

Differences in Construction and Crosstalk

The two cable types differ in construction. One feature that Cat5e cables lack compared to Cat6s is a spline. Splines are found within the cables, separating twisted-pair copper wires.

The spline facet is considerable because of its added performance bonus for Cat6 cables. It promotes quicker and more durable connection, as the wire separation decreases the risk of their signal transmission interfering with one another’s.