The Proper Way To Pull Ethernet Cables From a Pull Box

The Proper Way To Pull Ethernet Cables From a Pull Box

When connecting two sources in a network, you will need a pull box and a cord that reaches. Pulling Ethernet cables will create a connection over a long distance, but it must follow a proper process. Read on to understand the best way to pull Ethernet cables from a pull box.

What Is Cable Pulling?

You may need to connect one device to another at various distances. Cable pulling extends or pulls a cord from one source to another while keeping the cable intact. You need to stretch or bend the cable in a way that doesn’t damage or strain the conductors or jacket. You may pull cords through various openings, such as conduits or pull boxes, to guide them to their target destination.

What Is a Pull Box?

The pull box is a metal box attached to a wall or other flat solid surface with metal tubing extending from its sides. Conduits extend from the box’s sides and protect cables that enter and exit the box.

A pull box pulls and feeds cables from their source in the direction of the connection point through a conduit. You will have an easier time maneuvering the cords you use and protecting them in exposed places when using a pull box. This protection is effective in multiple situations, especially when organizing the cabling in your network.

Pulling Ethernet Cables From a Pull Box

Most cable pulling is similar in their methods, tools, and use of a pull box. Pulling Ethernet cables from a pull box is no different; you have various ways to pull properly.

The most efficient pulling method involves fish tape. Using this tool is a common practice to pull cords through tight spaces, and it requires fish tape to attach to the wires of an exposed Ethernet cable. The fish tape will pull it through the conduit from 25 to 100 feet.

Fish tape is a useful method that adequately draws an Ethernet cable from a pull box and out of the conduit, where you will crimp an RJ45 plastic end to the cord after removing the fish tape. You should use this method to connect your Ethernet cables over long distances and create the potential for implementing bulk network cables into your network to expand its capabilities and size.

It’s essential to know how to pull cables, and proper pulling is important for creating a connection in your network. Use this guide to help you pull Ethernet cables through pull boxes so they will have protection and a route to their destination to give you the wired connection you need.

Leave a Reply