Firewire 400 4-pin cable, IEEE-1394a, Black, 10ft
Firewire 400 4 Pin cable, IEEE-1394a, 10 foot - Part #: 10E3-03110
50 | 100 | 250 | 500 |
$5.39 | $4.97 | $4.55 | $CALL |
Our Firewire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single Firewire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power ,if your device requires a 4 pin connector it will not be powered/charged via Firewire it will instead use its own separate power.
Note: All camcorders use a 4-pin connector for their 1394 interface.
Nearly all computers use a 6-pin connector for their 1394 interface.
So, you need a 6-pin to 4-pin configuration to connect a computer to
a camcorder.
If you want to transfer video between two camcorders then you need
a 4-pin to 4-pin configuration.
- Part #10E3-03110
- Warranty:Lifetime
- UPC Number:846568002809
- End 1:Firewire 4-pin Male Plug
- End 2:Firewire 4-pin Male Plug
- Length:10 feet
- Color:Black
- Wire Gauge:22 AWG
- Shield Type:braid
am
(petaluma, ca)
Excellent
DW
(Middletown, RI)
Works perfectly, thanks!
TW
(Branson, MO)
Good quality cable and connectors. Plugged right into camera and DVD recorder without a problem and was duplicating immediately. Have ordered a number of cables here and don't know why anyone would use any other place. Quality products, reasonable shipping, and prices that are probably the lowest anywhere.