Cat6a Blue Copper Ethernet Cable, 10Gbit 500MHz, 15ft
Cat6a Blue Copper Ethernet Patch Cable, 10 Gigabit, Snagless/Molded Boot, POE Compliant, 500 MHz, 15 foot - Part #: 13X6-06115
Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568.2-D Category 6 specifications.
This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
CR (PACIFICA, CA)
Well constructed cable. Construction and use of the CableWholesale.com Cat6a patch cable enables me to use them in patch panels that might otherwise be to tight for other cables that have thicker boot material construction on the connector. The only improvement to make for this item is in relation to the lack of cable length printed on their the packaging or the cable itself. In the future the length need to be printed on the wrapper and/or the cable in addition to the part number. Your competitors already do so and this makes sorting and using their patch cables a little quicker.