1ft USB 2.0 Printer Cable, Type A to B
In stock - Usually ships same day
This is a 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).
Regularly Ordered Together
Part #: 10U2-02201
USB 2.0 Printer/Device Cable, Type A Male to Type B Male, 1 foot
- UPC Number:846568023002
- Converts:Converts back and forth between USB Male Plug and USB Printer/Device Male Plug
- End 1:USB Male Plug
- End 2:USB Printer/Device Male Plug
- Length:1 foot
- Wire Gauge:28/24 AWG
Just what I needed, works fine
Needed a replacement that was shorter. This did the trick
Works as well as the more expensive cables. Will buy from you again.
(Buena Park, CA)
It's just a very short USB Cable. It plugs in and works.
There isn't too much to review.
(WINSTON SALEM, NC)
Just what I wanted to connect the printer to the switch box I ordered earlier.
(North Bend, OR)
Just the connection needed and works perfectly.