Firewire 400 4-pin cable, IEEE-1394a, Black, 6ftProduct Filters
Note: All camcorders use a 4-pin connector for their 1394 interface.
Nearly all computers use a 6-pin connector for their 1394 interface.
So, you need a 6-pin to 4-pin configuration to connect a computer to
If you want to transfer video between two camcorders then you need
a 4-pin to 4-pin configuration.
Firewire 400 4 Pin cable, IEEE-1394a, 6 foot
Our Firewire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single Firewire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power ,if your device requires a 4 pin connector it will not be powered/charged via Firewire it will instead use its own separate power.
am (petaluma, ca)
RD (Ozone Park, NY)
Well-made cable. Works well. Not flimsy. High quality.
EC (Fountain Valley, CA)
SG (Arab, AL)
Works great-have already told others that if they need cables that this is where they need to buy them...............
RC (York, PA)
good quality cables!!