1U Rackmount 18 Port Power Supply, 12VDC/10A, 18 Cameras, 19 inch
Rackmount 18 Port Power Supply, 12 Volts DC / 10 Amps, Supports 18 Cameras, 1U, 19 inch
Contact us about availability
The 19 inch 12VDC Rackmount Power Supply powers up to 18 of your 12 Volt DC devices and is designed to be rackmounted inside a server room or rack. The rackmount power supply includes a front panel LED indicator to monitor the power status of each port. A rear fan is included to supply efficient cooling to the unit. This unit does not include rack mount screws or a power cable.
Rack Mountable Power Distribution
Input Voltage Ranges: 115V AC ±10%
Input Frequency: 60Hz
Input Current: 6A RMS max. for 115 V AC
Inrush Current: 60A max.
Voltage: 12V DC
Max. Current (18 Ports): 10A
Port Current (each): 0.6A
Peak Current (each): 1.0A
Ripple & Noise: 120mv
Line Regulation: ±1%
Load Regulation: ±5%
Total Output Power: 120W max.
Efficiency: 80% min. under max. range load
Rise Time: 10ms
Hold Up Time: 16ms
Current Leakage: 3.5ma
Short Circuit Protection: +12V
Over Current Protection: 110% - 150%
Over Voltage Protection
Operating Temperature: 0˚C to 40˚C
Operating Humidity: 20% to 90% RH
Operating Altitude: up to 10,000ft
Storage Temperature: -20˚C to +85%C
Storage Humidity: 10% to 95% RH
Storage Altitude: Up to 50,000ft
Vibration: 10*500Hz, .2G 10Min/T-Cycle, period for 60min each axes
Cooling: 4cm Fan
MTBF: 100K Hours at Max. Load, Normal Line and 25˚C
Physical Dimensions: 210 (L) x 248 (W) x 90(H)mm
AC Connector: IEC 320 Type
DC Connectors: Pitch: 9.50mm, Reted: 300V 20A, Screw Torque Value: 8.8Lb-in., suitable electric wire: 22-12AWG
Input to Output: 1500V AC for 1 Sec.
Input to Frame Ground: 1500V AC for 1 Sec.
Input to Output: 500V DC / 50 M Ohms
Input to Frame Ground: 500V DC / 50 M Ohms