Tone Generator & Probe Kit

View all products in category Cable Testers

Tone Generator & Probe Kit

Click image to zoom.

• Lifetime Warranty

Quantity

Price

$86.91

Found it cheaper?

Part #: 31D3-56713

This Tone Generator is a very practical tool, which provides a single or dual tone signal, two test leads and a 4-conductor modular cable. It generates a signal from one end and traces the cables from the other by probe, even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. It is easy to be used to verify cables continuity, pair condition, line polarity and voltage in network cabling systems (Category 5 and Coax) and modular telephone lines.

Tone Generator Features:

2-position button for single tone or dual tone signal
Toggle switch to control 3 modes of operation
3-color LED indicator display for telephone line polarity, continuity and voltage testing
Black and Red Aligator Clips and standard RJ-11 plug to test individual wire or RJ-11 jack

Probe Features:

Special inductive plastic tip, which prevents accidental shorts when using
near high voltage devices
Traces and identifies wires or cable in a bundle or group without damaging cable insulation Adjustable volume level for various work environments Compatible with all existing tone generators in the market Power switch to prevent battery drain

Specs

The Tone Generator is very practical tool, which provides a single or dual tone signal, two test leads and 4-conductor modular cable. It generates a signal from one end and traces the cables from the other by Probe, even when cables was in bundle or hidden in a mess punch down blocks or wall plates. It is easy to be used to verify cables continuity, pair condition, line polarity and voltage in network cabling systems (Category 5 and Coax) and modular telephone lines etc.

Tone Generator Features

Provides a tone switch for choosing either a single solid tone or dual alternating tone
Provides a toggle switch to control the 3 modes of operation
A three colors LED indicator display for line polarity, continuity and voltage testing
Provides black and red testing leads and a standard 4 pin modular cable for individual wire test or modular jack test Handy size and ease of use

Tone Generator Specifications

1 ft each of red and black test lead
1 ft of 4 pin Modular cord and plug
One 3-position toggle switch for operation modes control
One 3-colors LED display for line polarity, continuity and voltage test
One 2-position slide switch for buzzer volume level selection
Power: 9 VDC Battery
Size: 115x63x26mm(4.53" x2.49" x1.03" )
Weight. 0.42 LB.

Probe Features

Can trace and identify wires or cables in a bundle or a group without damaging cables insulation
Can work with any existed tone generator in the market
Two levels of buzzer volume can be selected for increasing sensitivity and meeting with any work environment
Power switch prevents battery drain

Probe Specifications

One push button test switch
One 2-position volume level switch
Power. 9VDC Battery
Size: 1l5x63x26mm(4,53" x2.49" x1.03" )
Weight: 0.36 LB

Reviews

Have an opinion about this product?
Write a review and share it! Add a review
There are currently no customer reviews for this product.