The NETest network cable tester is a simple but comprehensive cable tester that will diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, 100BASE-Tx, 365A, TIA-586A, TIA-568B & Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and miswiring, but also will identify up to 4 different cables from the tested end.
Part Number 31D3-48100
The NETest™ network cable tester is a simple but comprehensive cable tester that will diagnose
wiring faults for 10BASE2 (Coax), 10BASE-T, 100BASE-Tx, 365A, TIA-586A, TIA-568B & Token
Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed
pairs, split pairs and miswiring, but also will identify up to 4 different cables from the tested end.
Features
-
Can test the cables, such as 10BaseT, 100BaseTx,
10Base2(coax), 356A, TIA-568A, TIA-568B & Token Ring etc.
- Split test Cable length Min. 1.2 M ( about 4 Feet ) Max. 150M ( about 492 Feet )
- Can test the wiring faults of open, short, reversed,crossed and split.
- Can identify up to 4 different cables on the other end by provided remote identifiers.
- Simple and effective use
- A large flashing LED and 4 LEDs clearly display the fault status.
- Designed with two 9V DC battery for longer operation and easy replacement.
Customer Reviews |
Have an opinion about this product?
Write a review and share it!
Add a review
|
There are currently no customer reviews for this product. |
|
|
