Lan Tester Network Cable Tester, Pin Configuration/Wire Map Results
LANtest is a newly designed and very practical tester that can easily read the correct pin configuration of 10 Base-T cable (Category 5), 10 Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568 A/568B and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote kit it can test cables installed far away either on a wall plate or patch panel. It is easy to verify the cable continuity, open, short and cross-connect.
LANtest is a newly designed and very practic al tester that can easily read the correct pin configuration
of 10 Base-T cable (Category 5), 10 Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568 A/568B
and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote
kit it can test cables installed far away either on wall plate or patch panel. It is easy to verify the
cable continuity, open, short and cross-connect. It's affordable, so you can benefit the most.
LANtest Kit Contents:
- 1 Master box
- 1 Remote Box
- 2 BNC l5cm adapter cable
- 1 BNC M/M adapter
- 1 RJ45 15cm Modular cable
- 1 Deluxe carrying bag
