12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord

12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord - Part Number: 51W2-12106
12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord - Part Number: 51W2-12106 12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord - Part Number: 51W2-12106 12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord - Part Number: 51W2-12106 12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord - Part Number: 51W2-12106
43.23
51W2-12106
Contact us about availability
Product Details
  • Warranty: 1 year
  • Connection: 3-prong Power Plug
  • Length: 3 feet
  • Color: Silver
  • Wire: 14 AWG
  • Weight: 3.00 lbs
Product Information

12 Outlet Vertical Rackmount Power Distribution Unit (PDU), Power Strip, 15A with 6ft Power Cord

The 12 Outlet Vertical Rackmount Power Distribution Unit (PDU) mounts vertically on the side of your server rack and features 12 ports for providing and managing AC power to several devices. A 15AMP integrated circuit breaker is included for protection against overload. The power strip rack hinges on the end so you can mount the power strip onto the side of a rack or any wall, table, etc. The power strip is also UL listed; meaning it meets and exceeds rigorous safety requirements.

Features:
12 Outlets
120V AC, 15AMP
Lighted ON/OFF switch
Integrated Circuit Breaker; Overload Protection
14AWG 6ft Power Cord
Length: 36 inches
1.5 inches of spacing between each outlet
UL listed
4.0 / 5.0 4.0 / 5.0 (2 reviews)
Login to review this product
5 / 5 5/5 - December 01, 2014
MN (Taylors, SC)

This replaced two off-the-shelf power strips with surge protection and a switch. It was exactly what I needed for my entertainment center. It works fine laying on the floor.

3 / 5 3/5 - August 01, 2014
WM (Los Angeles, CA)

Does what it says, but the build quality is lacking. Screws don't fit very well (very hard to tighten) and the length is not correct to go from one rack unit to another. So you end up only putting three screws in, two on one end and one on the other