Lan Tester Cable Tester Pro with AAA Battery

View all products in category Cable Testers

Lan Tester cable cables Tester Pro with AAA Battery: 31D3-56652

The LANtest Pro is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the LANtest Pro will test twisted pair cables for open pairs, shorted pairs, reversed pairs, crossed pairs and split pairs. Just push the TEST button, and the LANtest Pro will automatically scan for any existing faults in your cable. The specially designed remote terminator is provided for one-person testing of installed cables.

Features

Tests for wiring faults of open, short, reversed, crossed and split pairs Split pair fault detection at a minimum 40cm cable length
Verification of shield integrity
Specially designed remote unit that enables one person to test installed cables
Easy to read fault display and high speed testing
Debug mode for detailed fault identification results
Auto sleep mode and power off switch to decrease power consumption
Low battery indicator

Specifications

Connectors: LANtest Pro Main Unit – RJ45 jack Remote Unit – RJ45 jack
Pairs tested: 1/2, 3/6, 4/5, 7/8 and shield
LED display: Horizontal: 5 Green LEDs for pairs and shield display Vertical: 5 Red LEDs for fault display (OPEN, SHORT, REVERSED, CROSSED, SPLIT PAIRS and LOW BATTERY)
Cables test length limit: Minimum: 0.4m Maximum: Over 200m
Power: LANtest Pro – 6V alkaline DC battery ( included) Remote identifier – no battery required Dimensions: LANtest Pro – 125 x 52 x 30 mm (L x W x H)

Part Number 31D3-56652