Cat5e Gray Ethernet Patch Cable, Snagless/Molded Boot, 1 foot
1 foot Cat5e Gray Ethernet Network Patch Cable, Snagless/Molded BootCat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office.
This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- Cable Insulation: PVC
- 4 Stranded Pairs UTP
- Conductor Gauge: 24 AWG.
- Frequency: 350MHz
- Compatible with current cat 5 equipment
- Wire Type: EIA/TIA 568B Category 5E
- Impendance:100 ±22 ohm (350 Mhz Cat. 5)
Login to review this product
(American Fork, UT)
Good quality and reasonable price
(Yorba Linda, CA)
Quality product at a reasonable price.
Great Product, Great Price
1 ft. patch cables are pretty much only used at patch panels. The boots on these cables are significantly thicker that those on 1 ft. cables previously purchased from you. This makes it extremely difficult to use them for patching-in drops on high-density switches. Please be consistent in sourcing this type of item.