Coaxial, Cable Stripper, RG58, RG59 and RG6

1/5 - August 28, 2018
DJ (LAFAYETTE, CO)

This tool is a real looser for me. I could never open the jaws wide enough to lay RG6 cable in place to strip it. I could not easily poke it in from the side, because a wire spring was in the way. The wire spring was bent out of place on the second try. The stripper now strips a spiral which is too deep in that it cuts most of the shielding. Luckily I purchased a different cable stripper locally that worked just fine, it doesn't need a wire spring and RG6 lies correctly in place.

5/5 - May 30, 2017
RA (Denton, TX)

Very handy tool ...

5/5 - February 15, 2017
RF (Lincoln, Ne)

Well made excellent product. Works extremely well.

5/5 - February 05, 2017
DC (Hope, AR)

Easy to use. Clean Stripping.

3/5 - November 24, 2016
JH (vancouver, bc)

N/A. Haven't tried it yet but it has to better than my normal tool which doesn't work on coaxial.

5/5 - November 20, 2016
RH (Fayetteville, NC)

works great

5/5 - September 14, 2016
PP (Hebron, IN)

great produce built tough

4/5 - January 28, 2015
DB (Greenview, IL)

Inexpensive stripper allows blade elevation adjustment but not blades separation adjustment, better than struggling by hand.

5/5 - August 23, 2013
SH (Suffolk, VA)

It required an adjustment to function correctly but it was quickly and easily accomplished!

5/5 - July 26, 2012
HB (PARMA, OH)

Great price

5/5 - September 18, 2010
TC (san diego, CA)

This is a replacement of an expensive one that broke and works great